background image

162A

    

SAVE THESE INSTRUCTIONS

Page 27

(162)  MODEL SF15220 SAND FILTER PUMP  ENGLISH  7.5” X 10.3”  PANTONE 295U  08/29/2012

English

PARTS LIST

LIMITED WARRANTY

Your Sand Filter Pump has been manufactured using the highest quality materials and 

workmanship. All Intex products have been inspected and found free of defects prior 

to leaving the factory. This Limited Warranty applies only to the Sand Filter Pump and 

accessories listed below.

The following provision is only valid within the European member states countries: The 

legal regulation of Directive 1999/44/EC will not be effected by this Intex warranty.

The provisions of this Limited Warranty apply only to the original purchaser and is not 

transferable. This Limited Warranty is valid for the period noted below from the date of 

the initial retail purchase. Keep your original sales receipt with this manual, as proof of  

purchase will be required and must accompany warranty claims or the Limited Warranty 

is invalid.

     Sand Filter Pump Warranty – 2 Years 

     Hoses, Plunger Valves & Fittings Warranty – 180 days   

If a manufacturing defect is found within the periods noted above, please contact the 

appropriate Intex Service Center listed in the separate “Authorized Service Centers” 

sheet. The Service Center will determine the validity of the claim.

IMPLIED WARRANTIES ARE LIMITED TO THE TERMS OF THIS WARRANTY AND 

IN NO EVENT SHALL INTEX, THEIR AUTHORIZED AGENTS OR EMPLOYEES BE 

LIABLE TO THE BUYER OR ANY OTHER PARTY FOR DIRECT OR CONSEQUENTIAL 

DAMAGES OR LIABILITIES. Some countries, or jurisdictions do not allow the exclusion 

or limitation of incidental or consequential damages, so the above limitation or exclusion 

may not apply to you.

This Limited Warranty does not apply if the products are subject to negligence, abnormal 

use or operation, accident, improper operation, improper voltage or current contrary to 

operating instructions, or to damage by circumstances beyond Intex’s control, including 

but not limited to, ordinary wear and tear and damage caused by exposure to fire, flood, 

freezing, rain, or other external environmental forces. This Limited Warranty applies only 

to those parts and components sold by Intex. The Limited Warranty does not cover 

unauthorized alterations, repairs or disassembly by anyone other than Intex Service 

Center personnel.

The costs associated with the loss of pool water, chemicals or water damage are not  

covered by this warranty. Injury or damage to any property or person is not covered by 

this warranty.

Summary of Contents for SF15220




























Reviews: