162A
SAVE THESE INSTRUCTIONS
Page 16
(162) MODEL SF15220 SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 08/29/2012
English
SAND FILTER PUMP HOSE CONNECTION SETUP (continued)
SETUP
INSTRUCTIONS
For INTEX pool size 16' and below:
1. In a counter-clockwise motion unscrew plunger valve union from the threaded
strainer connector
(26)
. Be careful not to lose the step rubber washer
(23)
.
2. Grasp the plunger valve assembly. Make sure the step washer
(23)
is in place.
Connect adaptor B
(28)
to plunger valve union.
3. Remove wall plug and then insert the strainer
(29 & 31)
into the lower position
of protruding hose connection, and the nozzle
(29 & 30)
into the upper position
of protruding hose connection. Adaptor B
(28)
fits over the strainer
connection
(29)
inserted into the connection. Tighten securely.
4. Remove the drain cap
(3)
before attaching the drain/waste hose or pipe.
For NON-INTEX pool:
Connect the hose
(12)
to the pool inlet/outlet connection with a large hose clamp.
Tighten securely. Remove the drain cap
(3)
before attaching the drain/waste
hose or pipe.
POOL
LARGE HOSE
CLAMP
POOL
12
3
29 & 30
29 & 31
3
