background image

346

PO

S  AVE THESE INSTRUCTIONS

(346PO)  SPA  ENGLISH  7.5” X 10.3”  PANTONE 295U  08/10/2019

English

Page 15

OPERATION (continued)

Setting Examples

Water Temp 

(

o

C/F)

HSDT

HSOH

Action

40/104

000H

000H

HSDT & HSOH functions are off. Heating system has to 
be activated manually by pressing (   ) button. See “Spa 
Control Panel” section for details.

40/104

000H

005H

HSDT is off. Heating system starts operating for 5 hours 
and then stop, regardless if the water temperature has 
reached 104°F/40°C or not. The information shown 
on the LED display alternates between the remaining 
operating hours and the water temperature.

40/104

012H

005H

The heating system will start after 12 hours and 
then operate for 5 hours only, regardless if the water 
temperature has reached 104°F/40°C or not. The 
information shown on the LED display alternates 
between the remaining countdown delay time and the 
water temperature.

40/104

012H

000H

The heating system will start after 12 hours, then operate 
until the water reaches 104°F/40°C  and stop. When the 
spa water temperature drops 1.8-3.6°F(1-2°C) below the 
set temperature the heating system will restart. When the 

fl

 ame icon on the display is red, the heating system is 

activated. When the 

fl

 ame icon turns green, the water is 

at the set temperature. The heating system is at rest and 
the 

fi

 ltration system will continue working nonstop.

Adjustment Buttons:

 Press the increase or decrease buttons to adjust the desire function 

settings. Press and hold the button will rapidly increase or decrease the numbers.

LED Display: 

Once plugged in the LED displays the current water temperature automatically.

If the control panel (3) is not placed on the control base recessed channel, the LED display 
will go blank after 5 minutes. Press any button to resume the control panel.

K

J

L

J: Decrease Button 
K: Increase Button
L: LED Display

SPA CONTROL PANEL

RF frequency band:2408~2476 MHz

Transmitter power: 10dBm

Summary of Contents for PureSpa SB-HW10




























Reviews: