347
A
S AVE THESE INSTRUCTIONS
(347IO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 07/08/2020
English
Page 13
SET UP (continued)
The spa tub inflation/deflation valve incorporates an “air pressure release” function that automatically
releases excess air when the spa tub internal pressure is between 1.5 - 2.5 psi (0.103 - 0.172 bar).
Air pressure release valve.
Colder temperatures at night
cause the spa to seem less
inflated.
Air expands in the midday
heat and correct air
pressure is restored.
Air expands in the midday heat.
Air pressure release valve kicks
in and releases excess air.
Inflation of spa in the morning.
IMPORTANT
Deflation
For Spa Tub Wall:
1.
Unscrew the cap to reveal the stem, push the stem in and turn
90 degree right to secure it in the down position
(see drawing 8)
.
2.
Once the deflation is completed, push the stem in and turn 90
degree left to return it to the inflation position.
3.
Replace the cap back.
NOTE:
To deflate the spa tub for storage, see “STORAGE” section.
For Cover Air Bladder:
1.
Pull valve cap out and squeeze the valve at its base until deflated.
2.
Close and recess the valve back.
8
NOTE:
If the spa cover air bladder does not fit into the spa tub due to over inflation, release some air from
the bladder until it fits.
For #28476:
