(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017
303
PO
SAVE THESE INSTRUCTIONS
English
Page 15
Remote Control:
1.
Remove the insulation material under the battery.
Battery type (included): CR2032. Be sure the battery cover
is securely attached.
2.
Place the remote control in a reachable location (on top
of the horizontal pool frame). The back of the remote
control is magnetized”.
Note:
In an emergency situation, simply press the “emergency cut off” button to shut off the
system completely, the indicator light inside the remote control housing will light up and the
display panel will indicate “C”.
• Check and make sure all screws are securely tightened on a regular basis.
• When not in use, fold the display panel down and cover the pool with a pool cover.
Long Term Storage and Winterization
You must disassemble and store the product indoors when the temperature drops below 0
O
C /
32
O
F or when the appliance will not be used for a long period of time.
IMPORTANT:
Close the support bracket before
disassembling and removing the swim-trainer unit from
the mounting bracket assembly (Only for Intex
Rectangular Frame Pools).
1. Turn off the transformer and unplug the power cable
from the electrical outlet.
2. Disconnect the swim-trainer unit power cable from the
transformer.
3. Remove the swim-trainer unit and the
mounting bracket assembly from the pool by reversing
the installation instructions.
4. Clean the swim-trainer unit with a garden hose, and air-dry thoroughly under the sun.
5. Store the unit and accessories in a dry place. The storage’s temperature should be between
0
O
C / 32
O
F and 40
O
C (104
O
F). The original packing can be used for storage.
OPERATION INSTRUCTIONS (continued)
Emergency Cut off Button
MAINTENANCE
4
22
10