10 / 18
Button: press this button to start unit when it is energized or stop the unit when it is in operation.
Button: press this button to set unit automatic on and off time
Button: press this button to select high speed of fan running (except dry and sleep modes)
Button: press this button to select low speed of fan running.
Button: press this button to increase temperature or timer setting.
Button: press this button decrease temperature or timer setting.
Button: press this button to make Celsius degrees and Fahrenheit degrees interchange.
Button: press this button to
select “Cool” mode.
Button: press this button to
select “Fan” mode
Button: press this button to
select “Dry” or “dehumidifying” mode
Button: press this button
to select “Sleep”
function under cooling mode.
Before using your remote, install the AAA batteries into remote control.
1. Press and glide the battery cover on the back of the remote control, then you can remove the cover.
2. Insert two new alkaline AAA batteries into the battery compartment. Be sure to note the proper polarity.
3. Reattach the battery cover and make sure the locking tab clicks into place.
Notes:
z
Use alkaline batteries only. Do not use rechargeable batteries.
z
When replace batteries, always replace both batteries with new batteries, do not mix old and new batteries.
Be sure to note proper
polarity of batteries
