Transmitters and receivers
no longer
have to be directly linked to each other!
We recommend this specifically if you want to change the properties of
individual sensors according to the duration of a scenario (e.g. all dimmers are
capped to 50% brightness after 10 pm).
After initial set up of the intertechno MasterGate, all transmitters and receivers
in your smart home are linked to the intertechno hub, this means that you can
digitally and dynamically change the connection between transmitters and
receivers using the app. You can define scenarios or even change the function
of light switches/remote controls. For more information, see
Adding
transmitters/sensors
.
How do you tell if you're in configuration mode or user mode?
As mentioned above, we strongly advise going through the complete
configuration mode at least once. Configuration mode is available only on your
home network, to which an intertechno MasterGate must be connected.
Configuration mode allows you to set up your smart home to perfection. We
recommend proceeding one step at a time by first connecting and pairing
receivers. We suggest that you first get familiar with the intertechno
MasterGate before moving on to setting up other configurations.
User mode allows you to control your smart home by switching individual
receivers on/off or activating scenarios for example. This mode is not designed
to be used to make changes to settings.
Black background:
User mode
White background:
Configuration mode
