Interroll Transfer module SH 1400
Maintenance and repair
Version 1.0 (06/2022) en
Translation of original operating instructions
33
Replacing the RollerDrive
2
1
1
2
3
3
5
4
Removing the drive roller from the side frames
1
Slideway
4
Drive roller (RollerDrive)
2
Nut (slideway)
5
Pressure shaft
3
Inside plate
WARNING
Risk of injury from crushing and electrocution
Installation and maintenance tasks on a conveyor system while it is in operation can cause
crushing and electric shock.
4
Power down the entire conveyor module and ensure that it cannot be started accidentally.
Requirement:
R
The module is shut down.
4
Remove the module from the connecting tabs,
see "Installing/removing module between
.
4
Remove the module conveyor,
see "Replacing the module conveyor", page 32
.
4
Loosen nuts (2) on the right and left at the slideways (1) in each case.
4
Remove the drive roller (4) with pressure shaft (5) at the inside plate (3) to the bottom and
out of the side frames.
