Interroll DP 0080, User Manual

Page: 26 / 40

26 of 40
Version 1.2 (08/2022) en
Translation of original operating instructions
Initial startup and operation
NOTICE
Damage of Pallet Drive in reversing operation!
¾
Ensure that a time delay is in place between forward and reversing movement. Before reversing, the motor
must come to a complete standstill.
If exact speeds are required, a frequency inverter and/or encoder may have to be used.
The specified rated speeds of the motor can deviate by ± 10 %. The belt speed indicated on the type plate
is the calculated speed at the drum diameter under full load, rated voltage and rated frequency.
7.2.1 Checks before every startup
1. Check the Pallet Drive for visible damage.
2. Ensure that no contact points exist between objects, conveyor belts and rotating or moving parts.
3. Ensure that the Pallet Drive and the conveyor belt can move freely.
4. Check all safety devices.
5. Ensure that no bystanders are in dangerous areas around the conveyor.
6. Clearly specify and monitor the way materials are placed on the conveyor.
7.3 Procedure in case of accident or fault
1. Stop the Pallet Drive at once and ensure that it cannot be started accidentally.
2. In case of an accident: Provide first aid and make an emergency call.
3. Inform the responsible person.
4. Have the malfunction repaired by qualified persons.
5. Start the Pallet Drive only after this has been approved by qualified persons.