Interroll Diverter SH 1500
Maintenance and repair
62
Version 1.0 (06/2022) en
Translation of original operating instructions
Requirement:
R
The module is shut down.
4
Replacing the ball module conveyor,
see "Kugelmodulband ersetzen", page 56
.
4
Remove the side covers,
see "Removing/installing the side plates", page 51
4
Unscrew screws (2) on the right and left in the side frames (1) and remove the old return
wheel (3) to the bottom.
4
Properly dispose of the old return wheel.
4
Push new return wheel (3) between the side frames (1) and fasten with screw (2) on the right
and left at the side frames (1) from the outside.
4
Reattach side covers and ball module conveyor in reverse order.
Replacing the idler pulley
1
2
3
2
1
3
Replacing the idler pulley
1
Torx screw
3
Idler pulley
2
Side frame
DANGER
Danger to life from electrocution and crushing
Installation and maintenance tasks on 400-V conveyor systems while they are in operation can
cause life-threatening electrocution and serious crushing.
4
Power down the entire conveyor module and ensure that it cannot be started accidentally.
