Interroll Diverter SH 1500
Installation
Version 1.0 (06/2022) en
Translation of original operating instructions
21
Installing supports
3
2
1
4
Support with two height-adjustable feet
1
Nuts
3
Torx screws
2
Washers
4
Height-adjustable foot
CAUTION
Risk of injury when lifting heavy loads
4
During the installation and replacement of conveyor modules or heavy spare parts, always
work in pairs or use suitable lifting devices.
The module sits on at least one support. Each support has two height-adjustable feet (4).
4
Place the module on the supports.
4
Position the supports underneath the module.
4
Fasten the rack with screws (3) and washers (2) from below as well as washers (2) and
nuts (1) inside in the side profile.
