Interroll Diverter SH 1500
Installation
42
Version 1.0 (06/2022) en
Translation of original operating instructions
Roller curve - front
diverter
8
7
3
6
3
3
5
2
1
2
4
2
1
Roller curve
5
Diverter
2
Torx screw
6
Connecting tab 2
3
Washer
7
Washer (small)
4
Connecting tab 1
8
Nut
4
Position the modules to be connected (1, 5) in such a way that the side profiles are aligned.
4
Align the top edges of the modules by using the height-adjustable feet of the supports.
4
Check horizontal alignment with a spirit level or rotation laser.
4
Secure the adjusted height.
4
Fasten connecting tab 1 (4) on the right and left at the side profile of the diverter (5) with
screws (2) and washers (3).
4
Fasten connecting tab 2 (6) at the inside and outside radius of the roller curve (1) with screws
(2), washers (3) and nuts (8).
4
Fasten connecting tabs (4, 6) with screws (2), small washers (7) and nuts (8) to one another.
4
Fasten the module torsion-free, e.g., by anchoring it to the floor or to adjacent components.
