CHAPTER II
INSTALLATION
TUACA
This chapter covers unpacking and inspection, selecting location, installing TUACA unit and electrical
requirements.
UNPACKING AND INSPECTION
Upon receiving unit, immediately remove TUACA unit from shipping carton and inspect for shipping
damage.
NOTE:
Remove the TUACA unit from the shipping carton and inspect for shipping damage. If
shipping damage is found immediately contact Sentry BevCon at (800) 661-3003. Do not
discard the shipping carton or any shipping materials in the event a freight claim must be
filed.
SELECTING LOCATION
IMPORTANT:
Ambient temperature for cooling unit should not exceed 100 degrees
“F". Operation of cooling unit in ambient above 100 degrees “F" can
and will contribute to early failure of condensing unit and poor quality
of finished product.
LOCATION RECOMMENDATIONS FOR THE TUACA UNIT
1.
Position unit as close as possible to proper electrical source, 120V 6OHz.
2.
Position unit with a minimum of 2" space between bulkhead and cabinet for sufficient space for
ventilation. Allow enough space between ceiling and unit for vessel removal.
LOOSE - SHIPPED PARTS
Item
Part
No.
No.
Name
Qty
1
- - - - -
Installation/Service Manual
1
2
S1842
Drain
pan
1
3
12008CS
Bottle Cap w/Sleeve
2
4
18013
Strainer
2
ELECTRICAL REQUIREMENTS:
The TUACA unit must be wire in accordance with N.E.C. or local ordinance.
