12-Pin Input Connector Definition
Connector J3 contains the PRPC’s 12 discrete wire inputs. There are 3 configurable active high/
low, 7 active low inputs, 1 analog input, and 1 dedicated ignition input. These inputs have their
own internal pull up/pull down resistors so they can be left floating when not used or not active.
These inputs can be used as part of the programmable logic to configure the output pins.
•
Pin #1 - (Yellow/Black stripe) Input 1, Configurable Active high/low
•
Pin #2 - (Brown/White stripe) Input 2, Configurable Active high/low
•
Pin #3 - (White/Black stripe) Input 3, Configurable Active high/low
•
Pin #4 - (Green/White stripe) Input 4, Active low
•
Pin #5 - (Gray/Black stripe) Input 5, Active low
•
Pin #6 - (Purple/White stripe) Input 6, Active low
•
Pin #7 - (Blue/White stripe) Input 7, Active low
•
Pin #8 - (Pink/Black stripe) Input 8, Active low
•
Pin #9 - (Black/White stripe) Input 9, Active low
•
Pin #10 - (Orange/Black stripe) Input 10, Active low
•
Pin #11 - (Tan/Black stripe) Input 11, Analog
•
Pin #12 - (Red/White stripe) Input 12, Dedicated Ignition
Connect inputs as needed. Tape up unused input wires.
InterMotive Inc.
13395 New Airport Rd.
Auburn, CA 95602
Phone: (530)-823-1048
Fax: (530)-823-1516
Page 9 of 13
www.intermotive.net
PRPC501-A-090314-INS
12 Pin Input
Back of Connector
Beeper Definition -
The PRPC501 has 6 unique beeper logic conditions and sounds.
Default Configuration:
Beeper 1: Low pitch, fast, 10 beeps when VBAT < 11.75V
Beeper 2: High pitch, medium, when ECT > 230F or TFT > 250F
Beeper 3: High pitch, continuous, when any I/O fuse is blown
Beeper 4: Medium pitch, medium, when the SB and Gas Pedal are depressed
Beeper 5: Medium pitch, medium, when VSS > 0 and PB is On
Beeper 6: High pitch, medium, when VSS > 76
