Intermec PM4I, User Manual

Page: 150 / 186

Appendix B — Media Specifications
134 EasyCoder PM4i Printer User’s Guide (Fingerprint Version)
Self-Adhesive Labels
⇐
a
⇒
Media Width (including liner)
⇐
b
⇒
Liner
The backing paper must not extend more than a total of 1.6 mm
(0.06 in) outside the labels and should protrude equally on both
side. Recommended minimum transparency: 40% (DIN 53147).
⇐
c
⇒
Label Width (excluding liner)
⇐
d
⇒
Label Length
Under ideal circumstances, a minimum label length of 4 mm
(0.16 in) could be used. It requires the sum of the label length (d)
and the label gap (e) to be larger than 7 mm (0.28 in), that batch
printing is used, and that no pull back of the media is performed.
Intermec does not guarantee that such short labels will work, but
it is up to the user to test this in his unique application.
⇐
e
⇒
Label Gap
The Label Stop Sensor must be able to detect the extreme front
edges of the labels.
Media Type Setup
• Label (w gaps)
Maximum:
114.3 mm (4.50 in)
Minimum:
25.0 mm (1.00 in)
Maximum: 112.7 mm (2.30 in)
Minimum: 23.8 mm (0.94 in)
Maximum: depends on SDRAM size
Minimum: 8.0 mm (0.32 in)
Maximum: 21.3 mm (0.83 in)
Recommended: 3.0 mm (0.12 in)
Minimum: 1.2 mm (0.05 in)