Intermec PM4I, User Manual

Page: 30 / 186

Chapter 2 — Installation
14 EasyCoder PM4i Printer User’s Guide (Fingerprint Version)
Keyboard
The keyboard is of the membrane-switch type and has 22 keys.
The keyboard is supplemented by a large
Print button. Some
keys have hard-coded functions in the startup and setup
modes.In application programs created using the Intermec
Fingerprint programming language, the keys can be assigned to
various functions or be disabled individually. Since one key is
assigned as shift key, up to 44 different key combinations are
possible. An audible signal, which can be turned off if so desired,
acknowledges that a key has been pressed.
Button Function
Print
button Feed/Pause a print job. Repeat last printed
label.
Toggle between pause and printing when
executing a print job.
+
Interrupt a running Fingerprint program.
Enter the Setup Mode (For help, see
“Setup Mode” on page 69.).
Feed out a blank label or the equivalent.
Perform a Testfeed (feed a blank label,
adjust the media feed).
Display error messages, Ready-to-Work
status, and communication channel
information.
Scroll between various types of
information after pressing the
F5 / i key.
Possible error messages and information
on active communication channels are
shown in a loop.
+
+