Intermec PM4I, User Manual

Page: 152 / 186

Appendix B — Media Specifications
136 EasyCoder PM4i Printer User’s Guide (Fingerprint Version)
⇐
c
⇒
LSS Detection Position
Variable, see Chapter 11.
⇐
d
⇒
Detection Slit Length
The length of the detection slit (excluding corner radii) must be
minimum 2.5 mm (0.10 in) on either side of the LSS detection
position (e).
⇐
e
⇒
Detection Slit Height
Media Type Setup
•
Ticket (w gaps)
Tickets With Black Mark
⇐
a
⇒
Media Width
⇐
b
⇒
Copy Length
⇐
c
⇒
LSS Detection Position
Variable, see Chapter 11.
⇐
d
⇒
Black Mark Width
The detectable width of the black mark should be at least 5.0 mm
(0.2 in) on either side of the LSS detection point.
⇐
e
⇒
Black Mark Length
Maximum: 21.3 mm (0.83 in)
Recommended: 1.6 mm (0.06 in)
Minimum: 1.2 mm (0.05 in)
Note: Do not allow any perforation to break the edge of the
media as this may cause the media to split and jam the printer.
Maximum: 114.3 mm (4.50 in)
Minimum: 25.0 mm (1.00 in)
Minimum: 20.0 mm (0.8 in)
Maximum: depends on SDRAM size
Maximum:
21.3 mm (0.83 in)