Intermec PM4I, User Manual

Page: 176 / 186

Appendix E — Setup Mode Overviews
160 EasyCoder PM4i Printer User’s Guide (Fingerprint Version)
Setup Mode; Media
(Intermec Fingerprint v8.70)
TESTFEED MODE:
SLOW
CONTRAST:
-2%
CONTRAST:
-4%
CONTRAST:
-6%
CONTRAST:
-8%
CONTRAST:
-10%
CONTRAST:
+10%
CONTRAST:
+8%
CONTRAST:
+6%
CONTRAST:
+4%
CONTRAST:
+2%
MEDIA TYPE:
VAR LENGTH STRIP
MEDIA TYPE:
FIX LENGTH STRIP
MEDIA TYPE:
TICKET (w GAPS)
MEDIA TYPE:
TICKET (w MARK)
SETUP:
MEDIA
MEDIA:
MEDIA SIZE MEDIA:
MEDIA TYPE
MEDIA SIZE:
XSTART MEDIA SIZE:
WIDTH MEDIA SIZE:
LENGTH MEDIA TYPE:
LABEL (w GAPS)
XSTART:
[24]: WIDTH:
[832]: LENGTH:
[1200]:
MEDIA:
PAPER TYPE
PAPER TYPE:
TRANSFER
TRANSFER:
RIBBON CONSTANT TRANSFER:
RIBBON FACTOR TRANSFER:
LABEL OFFSET TRANSFER:
RIBBON SENSOR TRANSFER:
LOW DIAMETER
RIBBON CONSTANT:
[90]: RIBBON FACTOR:
[25]: LABEL OFFSET:
[0]: RIBBON SENSOR:
[14]: LOW DIAMETER:
[0]:
MEDIA:
CONTRAST MEDIA:
PAPER
PAPER TYPE:
DIRECT THERMAL
CONTRAST:
+0%
PAPER:
PAPER SENSOR
DIRECT THERMAL:
LABEL CONSTANT DIRECT THERMAL:
LABEL FACTOR
LABEL CONSTANT
[85]: LABEL FACTOR:
[40]:
PAPER SENSOR:
[10]:
PAPER:
LOW DIAMETER
LOW DIAMETER:
[0]:
Continued from
the previous page
Continued on
the next page
MEDIA:
TESTFEED
TESTFEED:
[26 28 0 10]
Press <Enter> to per-
form a testfeed.
Values are read-only.
Only displayed if a paper sensor is installed.
Scroll forward
Scroll back
Scroll forward
Scroll back
MEDIA:
TESTFEED MODE
TESTFEED MODE:
FAST
Scroll forward
Scroll back
MEDIA:
LEN (SLOW MODE)
LEN (SLOW MODE):
[0]: