Intermec MobileLAN power 12, User Manual

Page: 27 / 46

2-7
6-Port Option
1. The Main LED lights up.
2. The Main LED and Port LEDs light up.
3. The Main LED and Port LEDs light up.
4. The Main LED lights up.
5. All Port LEDs are ready for normal indications.
12-Port Option
1. The AC and Alarm LEDs light up.
2. All Power Active and Power Not Active LEDs light up.
3. All Power Active, Power Not Active, and Alarm LEDs turn off.
4. The AC LED lights up and remains lit.
5. All Power Active and Power Not Active LEDs are ready for normal
indications.
Connecting Cables to the Power Bridge
The ports on the front of the Power Bridge are configured as data route
through ports for all data wires (pins 1, 2, 3, and 6).
Be sure to use a standard Category 5, 6, or 6e straight-through cable
including all 8 wires (4 pairs) as shown in the next illustration.
Data In Ports
Using a standard Category 5, 6, or 6e straight-through
cable, connect the cable leading from the Ethernet Switch/Bridge to the
Data In port.
Data & Power Out Ports
Using a standard Category 5, 6, or 6e
straight-through cable, connect the cable leading to the end device to
the corresponding Data & Power Out port.
Note: Be sure to connect correspondingly numbered Data In
and Data & Power Out ports.