Intermec MobileLAN power 12, User Manual

Page: 19 / 46

1-9
Console Port
Use the console port (DB-9 connector) to connect a terminal and to
perform local out-of-band management. The console port uses a
standard null modem cable and is set to 19,200 baud, 8 data bits, no
parity, and 1 stop bit.
Information Label
The Information label (located on the bottom of the 1-port Power
Bridge and on the rear of the 12-port Power Bridge) shows the
following:
•
Part number of the Power Bridge
•
Serial number of the Power Bridge and date code
You may need this information for fault reporting purposes.
Supply Data Label
The Supply Data label contains information regarding the total AC
power input (100 to 240 VAC), power frequency (50 to 60 Hz), and the
corresponding amperes.
Refer to Appendix A for proper selection of a power cord.
AC Power Receptacle
The Power Bridge automatically adjusts its power setting to any supply
voltage from 90 to 240 VAC.
Warning
Electrocution Hazard. Before connecting power to
the Power Bridge, please refer to the safety
information in Appendix A.
Avertissement
Risque d’électrocution. Avant de connecter
l’alimentation au Pont d’alimentation, veuillez
consulter les informations relatives à la sécurité à
l’annexe A.