Intermec MobileLAN access, User Manual

Page: 23 / 34

Chapter 2 — Installing the Power Bridge
MobileLAN power User’s Guide 13
To connect end devices to the Power Bridge
1 Connect a Category 5 (or higher) cable to the end device directly
(if the device is Power over Ethernet Enabled) or by using an
external splitter.
2 Connect the opposite end of the same cable to the RJ-45 wall
outlet. Monitor the port LEDs. If the Power Active LED lights,
the Power Bridge has identified your end device as Power over
Ethernet Enabled, and the port is sending power. Refer to
Appendix B, if needed.