Intermec MobileLAN access, User Manual

Page: 18 / 34

Chapter 2 — Installing the Power Bridge
8 MobileLAN power User’s Guide
Verifying Kit Contents
Unpack the kit and verify that these items are present:
•
Power Bridge
•
Rubber feet
•
User’s guide (this manual)
Recording Identification Information
Before proceeding with the Power Bridge placement and
installation, record the serial number here for future reference. The
serial number is located on the Information label on the bottom of
the Power Bridge.
Serial Number
Choosing a Suitable Site
Read the safety information provided in Appendix A
before carrying out any installation, removal, or any
maintenance procedure on the Power Bridge
.
Avertissement: Vous devez lire toutes les
informations concernant la sécurité à l’annexe A
avant d’entreprendre l’installation, le retrait ou toute
procédure d’entretien du Pont d’alimentation.
The Power Bridge is suited for use in an office environment where
it can stand alone (free stand) or hang from a wall.
When deciding where to position the Power Bridge, be sure that
•
the Power Bridge is accessible and cables can be connected
easily.
•
the ambient room temperature is less than 40°C (104°F);
however, the recommended room temperature is 25°C (77°F) or
less.