Intermec MobileLAN access 2102 S, User Manual

Page: 43 / 68

Maintaining and Troubleshooting the 2102 S
4-9
4
To upload the firmware using the MobileLAN access utility
1. Click Upgrade in the MobileLAN access utility. The upgrade screen appears.
2. Enter the IP address of access point you want to upgrade.
3. Enter the drive and filename of the upgrade file, or click Browse to locate the file.
4. Click Start Upgrade. The upgrade may take up to three minutes to complete.
5. When the upgrade is complete, reboot the access point (by unplugging it from the
power source and plugging it back in) to activate the new firmware.
Using a Web Browser
To upgrade the firmware using a Web browser session, you must first install the
firmware release on your PC, and then upload the release to your access point. For more
information about the firmware, see the release notes that accompany the firmware
release.
To install the firmware release on your PC
1. Navigate your Web browser to http://mobilelan.intermec.com and click Software
Downloads.
2. Choose the latest firmware release from the list of available software downloads,
and follow the instructions that appear on your screen.
After you have saved the firmware release on your PC, use the Web browser interface to
upload the file from your PC to the access point.
To upload the firmware release using the Web browser interface
1. Establish a Web browser connection. For more information, see “Establishing a
Web Browser Session” on page 2-3.