Intermec MobileLAN access 2102 S, User Manual

Page: 26 / 68

MobileLAN access 2102 S User’s Guide
2-6
To configure the 2102 S access point as a DHCP server
1. Establish a Web browser session. For more information, see “Establishing a Web
Browser Session” on page 2-3.
2. Click TCP/IP Settings and configure the following parameters:
•
Subnet mask
•
Static IP address
3. Enable the server.
a. In the TCP/IP Settings screen, click the DHCP Mode down arrow and choose
This AP is a DHCP Server.
b. Click Submit Changes and follow the instructions that appear on your screen to
save your changes.
4. Configure the DHCP server.
a. Click DHCP Server Setup. The DHCP Server Setup screen appears.
b. Configure the DHCP server. When you are finished, click Submit Changes and
follow the instructions that appear on your screen to save your changes.
The table on the next page explains each parameter.