Intermec MobileLAN access 2102 S, User Manual

Page: 28 / 68

MobileLAN access 2102 S User’s Guide
2-8
Configuring the 2102 S Access Point as a NAT Server
1. Establish a Web browser session. For more information, see “Establishing a Web
Browser Session” on page 2-3.
2. Click TCP/IP Settings and configure the following parameters:
•
Subnet mask
•
Static IP address
3. Choose This AP is a DHCP Server in the DHCP Mode field.
4. Click DHCP Server Setup and verify that the range of NAT addresses that are
automatically assigned will be valid for your environment. If you need to change
the IP addresses, be sure to enter a contiguous range of IP addresses that are not on
the same subnet as the IP address you have configured for your access point.
5. Click Submit Changes and follow the instructions that appear on your screen to save
your changes.
6. Configure any optional parameters. asdf