Intermec EasyCoder PL-Series, Programmer'S Reference Manual

Page: 169 / 220

Chapter 13— Configuration/Control Commands
EasyCoder PL-Series Printer Programmer’s Reference Manual 151
getvar result Returns the third encryption key.
Example Description
Syntax
Result
Get the encryption key value. (This example assumes
that the printer is using 40-bit encryption.)
! U1 getvar “wlan.encryption_key3”
“0000000000”
setvar choices 10 hexadecimal characters for 40-bit encryption; 26 hexadecimal
characters for 128-bit encryption. Default = all zeroes
Example Description
Syntax
Result
Set the encryption key value. (This example assumes
that the printer is using 40-bit encryption.)
! U1 setvar “wlan.encryption_key3”
“A1B2C3D4F5”
Sets the third encryption key to A1B2C3D4F5.
wlan.encryption_key4
Type: getvar; setvar
This parameter refers to the fourth indexed WEP encryption key. The
WEP encryption key is a hexadecimal string that is either 10 or 26
characters long depending on the encryption method (40-bit or 128-bit).
This key should match the wireless network WEP encryption key 4.
getvar result Returns the fourth encryption key.
Example Description
Syntax
Result
Get the encryption key value. (This example assumes
that the printer is using 40-bit encryption.)
! U1 getvar “wlan.encryption_key4”
“0000000000”
setvar choices 10 hexadecimal characters for 40-bit encryption 26 hexadecimal
characters for 128-bit encryption. Default = all zeroes
Example Description
Syntax
Result
Set the encryption key value. (This example assumes
that the printer is using 40-bit encryption.)
! U1 setvar “wlan.encryption_key4”
“A1B2C3D4F5”
Sets the fourth encryption key to A1B2C3D4F5.
wlan.encryption_mode
type: getvar; setvar
This parameter refers to WEP encryption. This parameter enables and
disables the printer’s WEP encryption. When using WEP encryption,
make sure that the encryption key matches the wireless network WEP
encryption key.