Intermec EasyCoder PL-Series, Programmer'S Reference Manual

Page: 163 / 220

Chapter 13— Configuration/Control Commands
EasyCoder PL-Series Printer Programmer’s Reference Manual 145
ip.smtp.server_addr
Type: getvar; setvar
This parameter refers to the IP address of the SMTP server used for
sending e-mail.
getvar result Returns the IP address of the SMTP server used for sending e-mail.
Example Description
Syntax
Result
Get the current SMTP server address.
! U1 getvar “ip.smtp.server_addr”
“0.0.0.0”
setvar choices Any valid IP address assigned to the SMTP server. Default = 0.0.0.0
Example Description
Syntax
Result
Set the SMTP server address to 10.10.10.10.
! U1 setvar “ip.smtp.server_addr”
“10.10.10.10”
Changes the SMTP server address the printer uses to
send e-mail to 10.10.10.10.
ip.snmp.enable
Type: getvar; setvar
This parameter refers to the SNMP protocol. Enabling this parameter
allows the printer to be monitored and managed remotely via network
management programs supporting SNMP.
getvar result Returns the SNMP status (on or off).
Example Description
Syntax
Result
Get the SNMP setting.
! U1 getvar “ip.snmp.enable”
“on”
setvar choices on, off. Default = on
Example Description
Syntax
Result
Disable the SNMP protocol.
! U1 setvar “ip.snmp.enable” “off”
Turns off the SNMP protocol.
ip.snmp.get_community_name
Type:getvar; setvar
You use this parameter when making SNMP queries. The SNMP client
must supply the get community name that matches the printer’s get
community name in order to query any SNMP data.