Intermec 6651, User Manual

Page: 89 / 136

9-7
2. Tap the OK button.
Connection will be made to this connection until you switch to a different
connection.
Connection via a LAN
Before making settings, you will need to get information such as IP addresses from
your network administrator. Make the settings as instructed by your network
administrator.
Note:
To connect to the Internet via a LAN, you will need a LAN (network) card.
Important:
•
Please use a LAN card whose operation has been confirmed by SHARP. Using
other LAN cards may damage the device or the card.
•
To make a connection to the Internet via a LAN, some knowledge of networks is
required. If a mistake is made when making a setting, not only will connection
not be possible but damage to the entire LAN network could result. Make
settings as instructed by your network administrator.
Registering a LAN Connection
1. Install a LAN card into the device, and make LAN card settings.
2. Double tap the Simple Internet Connection icon.
The Simple Internet Connection dialog box is displayed.