Intermec 6651, User Manual

Page: 43 / 136

2-21
Connecting an External CRT
You can use an optional monitor cable (PN: 871-012-030) to connect the device to
the external CRT (hereafter referred to as CRT) and display the device screen on
the CRT.
Note:
•
CRTs that can be connected with a monitor cable include LCDs (analog interface
connection), projectors and so forth that meet the following conditions.
Mode Horizontal scanning
frequency
Vertical scanning
frequency
800
×
600 dots
37.4KHz 60Hz
800
×
480 dots
37.4KHz 60Hz
640
×
480 dots
30.0KHz 60Hz
•
Input interface: analog RGB, 15-pin (mini D-sub, 15-pin)
•
The CRT displays the same screen as that which appears on the device. If you
connect the cable and turn on the power, it will be displayed at 800
×
600 dots
on the CRT.
•
With Microsoft Pocket PowerPoint, you can display a slide show on the CRT
while operating from the device. Select External display (800
×
600) or External
display (640
×
480) from the Tool menu’s Slide show settings. However, when
the screen is reversed, you cannot display this.
1. Turn off the power to the device and CRT.
2. Open the connector cover
.
Caution:
Do not open the cover from the bottom. If you force the cover open, you may
damage it.