0
I-Wave PE950/PE650 Installation Guide
Copyright © 2006 Intermatic, Inc.
The display panel on the unit provides pool
and spa water temperature information, and
makes it easy to control and program.
Synchronizing the Hand-
Held with the Panel-Mounted
Transceiver
When you’ve finished physical installation
and wiring and have
enabled power to the
control center
, you need to synchronize
the Hand-Held with the Panel-Mounted
Transceiver.
This is a two step process: first, delete any
programming that might exist in the Hand-
Held Remote and Receiver, then synchronize
the two devices with each other.
Deleting Any Existing Programming
This procedure deletes any existing
programming from the Remote and Receiver
units so they are ready to be programmed
into the network of this installation.
1
2
3
4
5
STA T
OK
POOL SPA
73
ºF SET
P 73
S 85
When you see
these numbers, it means
that circuit is ON
“POOL” or “SPA”
tells which mode
the system is in
“OK” means
Hand-Held
is communicating
with panel-mounted
transceiver
Current Temp
of the Pool or Spa,
depending on
whichever mode
the system is in
Temp settings
for pool (P)
or spa (S)
1
2
3
4
5
STA T
OK
POOL SPA
73
ºF SET
P 73
S 85
When you see
these numbers, it means
that circuit is ON
“POOL” or “SPA”
tells which mode
the system is in
“OK” means
Hand-Held
is communicating
with panel-mounted
transceiver
Current Temp
of the Pool or Spa,
depending on
whichever mode
the system is in
Temp settings
for pool (P)
or spa (S)
Detail on Hand-Held Remote Display Screen
Detail on Hand-Held Remote Display Screen
