Providing a brighter solution.™
Install Panel-Mounted Transceiver
1
Connection for Teledyne Laars
Heater
Connect two #14 gauge wires, designed
for use in hot environments, to the two
black wires, marked heater connection,
on the panel-mounted receiver.
Connect the other ends of the #14 gauge
wires from Step 1 to the Fireman’s Switch
terminal bar in place of the factory
installed wire loop.
Do not disconnect high limit or pressure
switches.
Turn the heater thermostat(s) to
maximum setting.
Turn the heater switch to the ON
position. For dual thermostat heaters turn
switch to Spa position.
1.
.
.
.
5.
