One: System Overview
Providing a brighter solution.™
Water Temperature Sensor
(PA122)
The Intermatic Water Sensor (
PA122
) monitors both pool and spa water
temperature, depending on the position of the diverter valves. Installation
is necessary for the thermostatic control to work. The sensor can be
ordered separately.
Optional Transceiver Repeater Module
(HA04C)
The Transceiver Repeater Modules
(HA04C)
ensure that no problems in reception
occur between the Hand-Held Controller(s)
(PE950)
and the Panel-Mounted
Transceiver
(PE650)
. Reception is affected by distance (about 100 feet, direct
line of sight) and by physical obstacles (like brick walls or structures). However,
by plugging in a Transceiver Repeater Module where necessary, long distances or
physical obstructions can be overcome.
Steel Outdoor Enclosure
Suitable listed breakers (purchase locally)
CIRCUIT BREAKER
FILLER
PLATE
MFR
SINGLE DOUBLE
TWIN
QUAD
GFCB
Cutler-Hammer
Murray
Siemens
Square-D
Thomas & Betts
BR
MP-T
QP
HOM
TB
BR
MP-T
QP
HOM
TB
BRD
MH-T
QT
HOMT
TBBD
BRD
MH-T
QT
HOMT
TBBD
GFCB
MP-GT
QPF
HOM
GFB
BRFP
LX100FP
QF3
HOMFP
FP-1C-TB
Upper or Lower Control Board
(PA125)
There are two Control Boards in your Mini-Wave Control System.
Each board is identical and capable of taking commands from both
the Panel Mount Transceiver and Control Pad and relaying this
information to the Pool/Spa equipment relays.
15” wide
5” deep
22” tall
15” wide
5” deep
22” tall
