Mini-Wave PE4 Installation Guide
Copyright © 2006 Intermatic, Inc.
Section 6:
Programming the Hand-Held Remote
Transceiver
Overview
The Hand-Held Remote Tranceiver
(PE950)
is the focal point of user convenience. It’s water-
resistant, shock-resistant, and is easy to program for handy remote control of the functions at a
specific pool-spa installation. An assortment of self-stick labels are provided to identify the
equipment you program into the five control buttons. We suggest that you program the device
first, then apply the appropriate label from the assortment supplied.
Synchronizing the Hand-Held with the Panel-Mounted
Receiver
When you’ve finished physical installation and wiring and have
enabled power to the control
center
, you need to synchronize the Hand-Held with the Panel-Mounted Transceiver. This is a
two step process: first, delete any programming that might exist in the Hand-Held Remote and
Receiver, then synchronize the two devices with each other.
Deleting Any Existing Programming
This procedure deletes any existing programming from the Remote and Receiver units so they are
ready to be programmed into the network of this installation.
NOTE:
If the word
FAILURE
instead of
SUCCESS
appears at the bottom of the screen during any of
the following steps, repeat the programming procedure, then try replacing the batteries in the
Hand-Held. If the problem persists, contact Intermatic Customer Service.
Press any button on the Hand-Held Remote to wake it from sleep.
(The unit goes to sleep to conserve battery life when it has been idle
for 60 seconds.) The screen display on the Hand-Held should look
generally like the example on the right, though it may display actual
temperatures and settings.
1.
Actuator Button
for Pool/Spa
Chlorinator
(not currently
functional)
Display Screen
ON/OFF Buttons
for Relays 1-2
Temp Set
Up/Down
Arrow Buttons
Actuator Button
for Water Feature/
Booster Pump
ON/OFF Buttons
for Relays 4-5
Actuator Button
for Pool/Spa
Chlorinator
(not currently
functional)
Display Screen
ON/OFF Buttons
for Relays 1-2
Temp Set
Up/Down
Arrow Buttons
Actuator Button
for Water Feature/
Booster Pump
ON/OFF Buttons
for Relays 4-5
1 2 3 4 5
STAT
OK
POOL SPA
73
ºF SET
P 73
S 85
When you see
these numbers, it means
that circuit is ON
“POOL” or “SPA”
tells which mode
the system is in
“OK” means
Hand-Held
is communicating
with panel-mounted
transceiver
Current Temp
of the Pool or Spa,
depending on
whichever mode
the system is in
Temp settings
for pool (P)
or spa (S)
1 2 3 4 5
STAT
OK
POOL SPA
73
ºF SET
P 73
S 85
When you see
these numbers, it means
that circuit is ON
“POOL” or “SPA”
tells which mode
the system is in
“OK” means
Hand-Held
is communicating
with panel-mounted
transceiver
Current Temp
of the Pool or Spa,
depending on
whichever mode
the system is in
Temp settings
for pool (P)
or spa (S)
Detail on Hand-Held Remote Display Screen
Detail on Hand-Held Remote Display Screen
STAT
POOL
OO
ºF SET
P OO
S OO
STAT
POOL
OO
ºF SET
P OO
S OO
