6
TruPortal IP-based Single Door Controller Quick Reference
Figure 9: IPSDC Board Layout
The following table lists the items shown in
Callout
Description
Callout
Description
1
IPSDC board with overlay
11
Network (Ethernet) port J10
2
Reader In (Access) J1
12
Console port J9
3
Door Contact, Request to Exit (RTE) and
Strike Relay J2
13
Enclosure tamper W5
4
Strike Voltage Select W2
14
Boot Mode switch SW4
5
Custom Wiegand Card Format DIP switch
SW1
15
Hardware Reset switch SW5
6
Reader Out (Egress) J3
16
Shutdown Request switch SW6
7
DIP Switch 2 (set all to OFF) SW2
17
Restore Defaults switch SW7
8
Status LEDs typical
18
Aux Power Input 24 VDC
Note:
Jumpers between pins 3 and 4, and pins 4
and 5 must remain in place.
9
UCSIMMPlus Module
19
Fire Alarm Control Panel (FACP) Input J6
Note:
The IPSDC does not support FACP so
this jumper must remain in place.
10
IPSDC board mounting holes
