Chapter 4: Web management
52
NS3550-8T-2S Industrial Managed Switch User Manual
The page includes the following fields:
Object
Description
SMTP Mode
Controls whether or not SMTP is enabled on the switch.
SMTP Server
Type the SMTP server name or the IP address of the SMTP server.
SMTP Port
Set the port number of SMTP service.
SMTP Authentication
SMTP authentication is enabled if selected. Authentication is required
when an email is sent.
Authentication User Name
Type the user name for the SMTP server if Authentication is
Enable
.
Authentication Password
Type the password for the SMTP server if Authentication is
Enable
.
E-mail From
Type the sender’s email address. This address is used for reply
emails.
E-mail Subject
Type the subject/title of the email.
E-mail 1 To / E-mail 2 To
Type the receiver’s email address.
Buttons
• Click
test
to send a test mail to the mail server to indicate if the account is available.
• Click
Save
to save changes.
• Click
Reset
to undo any changes made locally and revert to previously saved
values.
EEE power reduction
Configure the current EEE port settings on the EEE configuration page. EEE is a power
saving option that reduces the power usage when there is low or no traffic utilization.
EEE works by powering down circuits when there is no traffic. When a port acquires
data to be transmitted, all circuits are powered up. The time it takes to power up the
circuits is known as wakeup time. The default wakeup time is 17 us for 1G bit links and
