Chapter 6: Command line mode
304
NS3550-8T-2S Industrial Managed Switch User Manual
9600
Example:
Set 2048 frame size for port1
NS3552-8P-2S:/>
port maxframe 1 2048
Port Power
Description:
Set or show the port PHY power mode.
Syntax:
Port Power [<port_list>] [enable|disable|actiphy|dynamic]
Parameters:
<port_list>
: Port list or 'all', default: All ports
enable
: Enable all power control
disable
: Disable all power control
actiphy
: Enable ActiPHY power control
dynamic
: Enable Dynamic power control
Default Setting:
disable
Example:
Disable port power function for port1-4
NS3552-8P-2S:/>
port power 1-4 enable
Port Excessive
Description:
Set or show the port excessive collision mode.
Syntax:
Port Excessive [<port_list>] [discard|restart]
Parameters:
<port_list>
: Port list or 'all', default: All ports
discard
: Discard frame after 16 collisions
restart
: Restart backoff algorithm after 16 collisions
(default: Show mode)
Default Setting:
Discard
Example:
NS3552-8P-2S:/>
port excessive 1 restart
Port Statistics
Description:
Show port statistics.
Syntax:
Port Statistics [<port_list>] [<command>] [up|down]
Parameters:
<port_list>
: Port list or 'all', default: All ports
<command>
: The command parameter takes the following values: