Interlogix NS3550-8T-2S User Manual Download Page 49

Page: 49 / 470

Chapter 4: Web management

NS3550-8T-2S Industrial Managed Switch User Manual

DHCP relay statistics

This page provides statistics for DHCP relay.

Server statistics:

Object

Description

Transmit to Server

The number of packets relayed from client to server.

Transmit Error

The number of packets erroneously sent to clients.

Receive from Server

The number of packets received from the server.

Receive Missing Agent
Option

The number of packets received without agent information options.

Receive Missing Circuit ID

The number of packets received with the Circuit ID option missing.

Receive Missing Remote ID

The number of packets received with the Remote ID option missing.

Receive Bad Circuit ID

The number of packets in which the Circuit ID option does not match
with the known circuit ID.

Receive Bad Remote ID

The number of packets in which the Remote ID option does not
match with the known Remote ID.

Client statistics:

Object

Description

Transmit to Client

The number of packets relayed from server to client.

Transmit Error

The number of packets erroneously sent to servers.

Receive from Client

The number of packets received from the server.

Receive Agent Option

The number of packets received with the relay agent information
option.

Replace Agent Option

The number of packets received is replaced with the relay agent
information option.

Keep Agent Option

The number of packets received is kept with the relay agent
information option.

Drop Agent Option

The number of packets received is dropped with the relay agent
information option.

Summary of Contents for NS3550-8T-2S























































































































































































































































































































































































































































































Search results

Summary of Contents for NS3550-8T-2S

Reviews:

Related manuals for NS3550-8T-2S

Brands by name

Popular brands

Interlogix NS3550-8T-2S, User Manual

Search results

Summary of Contents for NS3550-8T-2S

Reviews:

Related manuals for NS3550-8T-2S

Brands by name

Popular brands