Interlogix NS3500-28T-4S User Manual Download Page 290

Page: 290 / 363

290

4.10 ACL

ACL

is an acronym for

Access Control List

. It is the list table of ACEs, containing access control entries that specify

individual users or groups permitted or denied to specific traffic objects, such as a process or a program. Each

accessible traffic object contains an identifier to its ACL. The privileges determine whether there are specific traffic

object access rights.

ACL implementations can be quite complex, for example, when the ACEs are prioritized for the various situation. In

networking, the ACL refers to a list of service ports or network services that are available on a host or server, each with

a list of hosts or servers permitted or denied to use the service. ACL can generally be configured to control inbound

traffic, and in this context, they are similar to firewalls.

ACE

is an acronym for

Access Control Entry

. It describes access permission associated with a particular ACE ID.

There are three ACE frame types (Ethernet Type, ARP, and IPv4) and two ACE actions (permit and deny). The ACE

also contains many detailed, different parameter options that are available for individual application.

The ACL page contains links to the following main topics:



MAC-based ACL

Configuration MAC-based ACL setting



MAC-based ACE

Add / Edit / Delete the MAC-based ACE (Access Control Entry) setting



IPv4-based ACL

Configuration IPv4-based ACL setting



IPv4-based ACE

Add / Edit / Delete the IPv4-based ACE (Access Control Entry) setting



IPv6-based ACL

Configuration IPv6-based ACL setting



IPv6-based ACE

Add / Edit / Delete the IPv6-based ACE (Access Control Entry) setting



ACL Binding

Configure the ACL parameters (ACE) of each switch port.

4.10.1 MAC-based ACL

This page shows the ACL status by different ACL users. Each row describes the ACE that is defined. It is a conflict if a

specific ACE is not applied to the hardware due to hardware limitations. MAC-based ACL screens in

Figure 4-10-1

Figure 4-10-2

appear.

Summary of Contents for NS3500-28T-4S












































































































































































































































































































































































Search results

Summary of Contents for NS3500-28T-4S

Reviews:

Brands by name

Popular brands

Interlogix NS3500-28T-4S, User Manual

Search results

Summary of Contents for NS3500-28T-4S

Reviews:

Brands by name

Popular brands