Interlogix NS3500-28T-4S User Manual Download Page 188

Page: 188 / 363

188

Figure 4-7-32

Forward All Setting Page Screenshot

The page includes the following fields:

Object

Description



VLAN ID

Select VLAN ID for this drop down list to assign MLD membership.



Port

The switch port number of the logical port.

Select MLD membership for each interface:

Forbidden:

Interface is forbidden from automatically joining the MLD via

MVR.

None:

Interface is not a member of the VLAN. Packets associated with

this VLAN will not be transmitted by the interface.



Membership

Static:

Interface is a member of the MLD.

Buttons

: Click to apply changes.

Summary of Contents for NS3500-28T-4S












































































































































































































































































































































































Search results

Summary of Contents for NS3500-28T-4S

Reviews:

Brands by name

Popular brands

Interlogix NS3500-28T-4S, User Manual

Search results

Summary of Contents for NS3500-28T-4S

Reviews:

Brands by name

Popular brands