Interlogix NS3500-28T-4S User Manual Download Page 241

Page: 241 / 363

241

Figure 4-9-20

The page includes the following fields:

Object

Description



List Name

Display the current list name.



Method List

Display the current method list.



Modify

Click

to edit login authentication list parameter.

Click

to delete login authentication list entry.

4.9.5 Access

This section is to control the access of the Managed Switch, including the different access methods – Telnet, SSH,

HTTP and HTTPs.

4.9.5.1 Telnet

The Telnat Settings and Information screen in

Figure 4-9-21

Figure 4-9-22

appear.

Summary of Contents for NS3500-28T-4S












































































































































































































































































































































































Search results

Summary of Contents for NS3500-28T-4S

Reviews:

Brands by name

Popular brands

Interlogix NS3500-28T-4S, User Manual

Search results

Summary of Contents for NS3500-28T-4S

Reviews:

Brands by name

Popular brands