P/N 1070544 (EN) • REV B • ISS 11MAR19
5
Figure 3: IADS device programming mode
Connect the IADS connection hub as shown in Figure 3 above. The IADS
connection hub should be connected via the USB cable to the computer.
Connect a programmable device via two-wire cable to the IADS connection hub,
and press Mode button to set the addressing mode, until the green LED is on.
Double-click the application file AdDev102.exe to run the software.
Figure 4: AdDev software interface
If necessary, choose the appropriate language from the Language combo box.
In the AdDev application, choose a correct COM port, or search through the
COM-port list to find the IADS connection hub by pressing Scan Ports. During the
start-up the application will scan all ports and search for the IADS connection
hub, if connected already.
“State” will show a status of the communication with the computer via USB. The
following values are possible:
• Operation successful!
• Operation failed!
• No connection!
PC
two-core cable
Point ID contact
USB
IADS connetion
hub