Intergraph TDZ 2000, System Setup

Page: 51 / 98

39
3. Press
ENTER
twice. A message displays notifying you that the password is disabled.
Anti-Virus
The Anti-Virus setting is only relevant for floppy diskettes. Hard disk drives and RAID disk
drives are not checked by the Anti-Virus option. When Anti-Virus is enabled, diskettes
cannot be formatted unless a quick format is executed, which does not write to Track 0 on
the diskette. A format that writes to Track 0 will not be performed. The default is Disabled
to allow formatting of diskettes in all circumstances.
Default Menu
The BIOS contains three configurations stored in CMOS RAM: Original BIOS settings,
Optimal BIOS settings, and Fail-safe BIOS settings. The Original BIOS settings are the last
current BIOS values used in the system. The Optimal BIOS settings are used in the
delivered system. The Fail-safe BIOS settings are recommended when there has been a
system failure.
NOTE Loading the Optimal or Fail-safe BIOS settings overwrites all customized parameter settings.
If you have customized any parameters, record them before loading the Optimal or Fail-safe
settings.
Original
Selecting the Original icon loads the last current BIOS values. Use this option as a
diagnostic aid if the system is unstable.
To load the Original BIOS defaults:
1. Select the Original icon to load the last used BIOS settings. The following message
displays:
Restore Old Values?
2. Select Yes to accept the values, or No to reject them.
3. Exit AMIBIOS Setup. The system restarts and uses the new values if you selected Yes.
Optimal
Selecting the Optimal icon loads the best-case values that optimize system performance. The
system is delivered using the Optimal BIOS values. If the CMOS RAM corrupts, the
Optimal settings are loaded during reboot.