Intergraph TDZ 2000, System Setup

Page: 24 / 98

12
Starting Operating System Setup
When you start your new TDZ 2000 for the first time, you must configure the operating
system software for use. After you first start the system, the Microsoft End User License
Agreement (EULA) screen displays.
NOTE Before starting the system for the first time, you may want to learn more about system power,
startup, and shutdown. See Chapter 5, “Operating Notes,” for this information.
To start the computer and set up the operating system software:
1. Turn on the monitor by pressing its power switch.
2. Open the system’s front panel door and press the Standby button (power switch). See
Chapter 1 for details. The system starts and the EULA screen displays.
3. Enter the Product Identification Number, found on the Certificate of Authenticity
included with your operating system documentation.
NOTE You must enter the Product Identification Number before you can continue Setup. You
cannot complete Setup if you do not enter the number.
4. Read the terms of the EULA and then follow the instructions displayed on-screen to
complete the Setup process. Accept the default settings provided by Setup, except as
follows:
−
Setup asks if you want to install networking. If you choose to install networking,
Setup detects the on-board network adapter and asks if you want to install the driver
software that it finds on the system disk. Allow Setup to install this driver software.
−
Create an Emergency Repair Disk when prompted.
−
Press
ENTER
or click OK at the logon dialog to log on to the operating system, if you
do not create a user account during Setup.
−
Select the \
I
386 directory if you are prompted for the location of Windows NT Setup
files, such as those for installing the video display adapter driver.
After you configure the video display, the sound processor, and networking, you can set up a
user account and join a workgroup or domain. See Windows NT Help for details on setting
up a user account and joining a workgroup or domain.