Interfacion QED-PL2, Owner'S Manual

Page: 9 / 35

9
QUICK START GUIDE
For people new to the QED, use the following Quick Start Guide to start detecting as quickly
as possible without having to understand all of the available settings and when/why to use
them.
When you feel confident in using the QED and wish to adjust the various QED settings
based on coil size, ground conditions, and target type (small; all; large) to name a few, then
refer to the
Advanced Setup Guide .
Step Description
Turn the detector ON by performing a Factory
Reset
Mode Factory Default (3)
Ground Balance
•
MGB, or
•
AGB
THS B Factory Default (50)
THS A Start at Factory Default (30) and increase until
a (slight) threshold is heard
GAIN Start at Factory Default (1) and increase GAIN
as high as prevailing EMI conditions and
Ground Type will allow.
Re-Ground Balance
•
MGB, or
•
AGB
Notes
Tip:
Once you have adjusted the detector to suit, leave the detector in the MGB adjustment
setting so that you can quickly adjust the GB whilst you are detecting.