7
START UP
Note: As the QED is marketed in various configurations, these steps are indicative only.
Step 1
Connect a suitable coil.
Step 2
Insert Batteries or connect Battery Pack
Step 3
Turn Detector ON by pressing the
BUTTON.
Turn ON the remote SPEAKER pressing the button at side of the speaker housing.
Step 4
Scroll through adjustment menu item numbers by pressing either
buttons.
When on the required adjustment menu item number press the
button
Step 5
INCREASE variable using
or DECREASE using
Step 6
To return to variable menu press the
button.
Step 7
To turn detector OFF, press and hold the
button and current adjustment settings will be
saved.
Step 8
To reload Factory Default Settings, turn the detector OFF, then PRESS and HOLD
the
button while pressing the
button.
Summary of Contents for QED-PL2
Page 18: ...18 2 THRESHOLD B THS B BIAS Setting range 1 99 Factory preset at 50 Notes ...
Page 34: ...34 NOTES ...
Page 35: ...35 ...
