14
AUTO GND BAL (AGB)
Setting range 1-200
Factory preset at 100
Description
The
Auto Ground Balance
(AGB) procedure is as follows:
Note: This procedure is required if the current GB setting is far different from
the current ground.
•
Hold the coil about 15" off the ground, press and hold the AGB
button while lowering the coil
•
The AGB Button MUST be released when the coil is about 3"
from the ground.
•
Take note of which direction (up or down) the Ground Balance
number changed.
o
If a minor manual precision adjustment is required, use
the MGB procedure aided by the above step.
•
For minor GB adjustments press and hold the AGB button and
bob the coil up and down to the ground.
•
When the tone has faded to a minimum, the detector will be
ground balanced.
Note: Do not hit the search coil with the ground surface as this can produce
unexpected results when trying to ground balance the detector.
YouTube Reference
to see how to Auto Ground Balance the
QED.
Notes
Tip:
The AGB is less
effective at low
Threshold B settings
(less than the neutral
position), so when using
these settings use MGB
instead
Summary of Contents for QED-PL2
Page 18: ...18 2 THRESHOLD B THS B BIAS Setting range 1 99 Factory preset at 50 Notes ...
Page 34: ...34 NOTES ...
Page 35: ...35 ...
