PCI-4302
Interface Corporation
-2-
z
CE Marking
This product is Information Technology Equipment (ITE) that complies
with EU Directive 89/336/EEC, using the EMC standards EN55022
(Class A). The main purpose of this product is use in the light industry
environment.
z
Environmental Specifications, Periodic Inspections, and Storage
For your safety, follow all warnings and instructions described in this manual.
z
Environmental Specifications
Use this product only under the conditions as shown below.
Parameter
Specification
Temperature Range
0
°
C to 50
°
C
Relative Humidity Range
20% to 90% (non-condensing)
Dust
Typical office environment
Corrosive Gas
None
Voltage Requirements
+5 Vdc (+/-5%)
Other
Within normal parameters for electronic equipment
Failure to follow this warning may result in electric shock, burns, serious injury, and in some cases, even cause
death.
Keep this PCI board away from flammable gases.
z
Periodic Inspections
The following inspections should be carried out on this board periodically.
Check these items!
□
Board surfaces should be free of
dust and foreign matter.
□
Check for dirt or corrosion on the
card edge and connector contacts.
□
Be sure that all
connectors and cables
are connected correctly.
PCI-4302
z
Storage
This board should be stored exactly the same way as when it was received. Proceed as follows:
1. Put the board back in its electro-conductive bag.
2. Wrap the board with the original packing material.
3. Avoid excessive humidity.
4. Do not expose the board to the direct rays of the sun.
5. Store the board at room temperature.
Warning!
!
Warning!
!
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
