PCI-4302
Interface Corporation
-30-
6.2 Hardware Specifications
Table 6.1 Hardware Specifications
Parameter
Specification
Number of channels
1
GPIB compatibility
IEEE Std 488.1 fully compatible
Signal line driver/receiver
75160 or equivalent (data lines)
75162 or equivalent (control lines)
Interface function
AH1, C1, C2, C3, C4, C5, DC1, DT1, L3/LE3, PP1/PP2, RL1,
SH1, SR1, T5/TE5
Transfer protocol
8-bit parallel, three wire handshake
Maximum transfer rates
1.1 MB/s (Actual transfer rates depend on your system
configurations and instruments on the GPIB.)
Maximum data transfer length
Total cable length: less than or equal to 20 m
Each cable assembly: less than or equal to 4 m
Number of devices
15 devices (max.)
GPIB
I/O connector
IEEE Std 488.1 standard or equivalent
Bus requirements
PCI local bus (Rev. 2.1 or later), 32 bit, 33 MHz
5 V and 3.3 V signaling environment
Number of I/O ports
32 ports
Interrupts
1 level
LED
General purpose, GPIB access, and I/O access
Data transfer
Programmed I/O transfer and bus master DMA transfer
Environmental conditions
Operating temperature: 0
°
C to 50
°
C
Relative humidity: 20% to 90% (non-condensing)
Supply voltage
+5 Vdc
Power consumption
0.3 A (typ.)
Board dimensions
106.68 mm
119.91 mm
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
