Interface Inc. ● 7401 East Butherus Drive, Scottsdale, Arizona 85260 USA ● Phone 480.948.5555
● Email:
● ORDER TOLL-FREE 800.947.5598
26
Mounting Holes
DIN Rail Mounting (Optional Kit)
A DIN rail mounting kit is available for top hat DIN rail EN 50022. Optional part DSCUSB-DIN consists of a pair of
screws and two DIN rail clips.
Remove the two screws on the rear of the DIG-USB-F case and replace with the longer screws from the DIG-USB-F-
DIN kit. These longer screws secure the din rail clips which sit in the rectangular depressions around the screw holes.
NOTE: You may want to remove and replace one screw at a time to avoid the case coming apart.
Once fitted the top face of the DIG-USB-F will be 31.4mm from the surface that the DIN rail is mounted on.
