Interface Inc. ● 7401 East Butherus Drive, Scottsdale, Arizona 85260 USA ● Phone 480.948.5555
● Email:
● ORDER TOLL-FREE 800.947.5598
19
The date is followed by the time in
HH:MM:SS:microseconds
format then the value.
Cursors are turned off once the navigation control is used.
Second Cursor
Turning this feature on will display a second cursor that can be positioned on the chart.
There is also some extra information displayed in the lower right of the window in the Help panel.
This displays the time difference between the two cursors (Plus the frequency if you had placed the cursors on two
adjacent features in a wave based signal) and the value difference.
Cursors are cleared once the navigation control is used.
Crop
When displaying large amounts of data (30 minutes of data equates to over 8.6 million data points) it is often only a
small portion that contains the actual data of interest. The Crop button discards data that falls outside of the
currently viewed portion of the entire data set and resets the chart and navigation control to focus only on this data.
The newly focussed data can then be navigated, saved or again zoomed and cropped.
If a mistake is made during cropping, the entire data can be captured again.
